Campen, Wildnis Ausrüstungen
Computer und Zubehör
Software
Spielekonsole
Spielzeug
Partyartikel
Drogerie
Parfüm und Kosmetik
Elektronik
Komponenten
Gadgets und Geschenkideen
Hobby
Basteln
Modellbau
Kleidung
Schuhe
Taschen und Koffer
Kochen und Tischservice
Küchengeräte
Gastronomie
Musik und Film
Musikinstrumente
Parfüm und Kosmetik
Persönliche Pflege
Parfüm und Kosmetik
Reisen und Urlaub
Schuhe
Kleidung
Taschen und Koffer
Spiele
Spielzeug
Partyartikel
Ton und Bild
Foto und Video
Wein und Starke getränke
Wohnen, Wohnaccessoires
Weihnachten
Möbel
Beleuchtung
EAN/GTIN: | 4250197248082 |
---|
The Alphacool Eiszyklon Aurora LUX Pro 2 fan is also used on the Alphacool Eisbaer Aurora series and, in addition to a wide control range, also offers outstanding digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the special design of the fan frame create unique effects.Ingenious lightingDigitally addressable 5V RGB LEDs are built into the frame and illuminate the entire frame on both sides. The frame is not completely transparent but the lighting is through narrow slits that are interrupted at four points. There are two rows of these slot-shaped recesses on the top. A narrow frame runs along the inside and outside of the frame. This creates a unique lighting that looks very noble. Thanks to the recessed diffusers, the light is distributed evenly. This avoids punctual illumination. Individual LEDs are no longer recognizable.Wide control range and silentThe fan can be controlled from 700 to 2000 rpm via the 4-pin PWM connection. The fan is almost silent at 700 rpm, but still offers a good air flow rate paired with a high static pressure. This means that the fan can also be used very well on radiators for water cooling. Thanks to the high air flow, the fan is also ideal for ventilating a housing. Decouplers can also be found directly on the frame. The soft foam pads reduce the transmission of vibrations to the housing. Another plus point for the silent ability of the fan.Connections℃The fan is controlled via a 4-pin PWM connector. The cable is 50 cm long. This means that the fan can also be connected to the mainboard or a special controller without additional adapter cables or extensions. The digital aRGB LED lighting is controlled via a JST 3-pin connector.Technical specifications- L x W x H: 120 x 120 x 25mm- Speed: 700 - 2000 rpm- Static pressure: 2.0 mm H2O- Air throughput: 104.49 m³ / h- Bearing: hydraulic- Fan connection: 4-pin PWM- aRGB connector: 3-pin JST + 3-pin 5V- LEDs: Addressable digital RGB LEDs- Volume: 21.5 - 33.8 dB (A)- MTBF: 40,000h